Wheel Loader Work Lights for Sdlg,Xgma,Foton

Maintenance and troubleshooting of Wheel Loader
11, loader forklift diesel engine "cauldron" there are those? How to eliminate and prevent?
"Boiling pot" refers to the diesel engine temperature is too high, the coolant in the water tank boiling, steam phenomenon. Diesel engine "boiling pot" reasons and prevention, elimination methods are mainly:
Seller. The inner wall of the radiator heat dissipation tube (core) is too thick, which affects heat dissipation. In use, attention should be paid to adding clean cooling water; And regularly remove scale in the water tank;
In lien. Lack of coolant due to leakage of radiator or cooling system. Check the cause of water leakage, add enough cooling water after troubleshooting;
An. Gasket or cylinder liner damage, high pressure gas in the cylinder into the water cooling system, resulting in water tank "bubble" "boiling pot" (in this case, more
With emulsification of diesel engine oil). Check whether the cylinder liner or cylinder liner is damaged, and replace it if necessary;
Looking. The water pump is damaged, the cooling water does not circulate or the circulation strength is insufficient. Check the cause of water pump damage and replace the water pump if necessary;
All measures. The machine works under high load for a long time, the fan belt is too loose, the wind speed is not strong, and the phenomenon of boiling due to overheating will also occur. The working load of loader should be reasonably arranged to prevent overheating.
㈥. The thermostat is damaged, resulting in the failure to open the large cycle, causing the machine to overheat, the thermostat should be replaced.
It should be noted that loaders working in alpine areas will also appear boiling phenomenon, the main reason is frozen in the radiator, coolant can not carry out large circulation. Therefore, in the use of loaders in alpine areas, we should pay attention to the heat preservation device in the front end of the radiator.